DIXON Male NPT x Push-on Hose Barb, 1/4" - 1/2"

DIXON Male NPT x Push-on Hose Barb, 1/4" - 1/2"

Regular price $1.02 Sale

Construction

Dryseal

Installation

Assembly Instructions:

  1. Trim hose end with smooth square cut.
  2. Lubricate either push-on fitting, hose or both.
  3. Insert push-on fitting into hose until first barb is in hose.
  4. Place end of fitting against a flat object (bench, wall, etc.) and grip the hose one inch from end. Push with a steady force until end of hose is covered by yellow plastic cap.

    Instructions

    Disassembly instructions:

    1. Leaving push-on fitting in place, make a 1" cut in the hose along the barbed end of the fitting. Note: Be careful not to nick barbs when cutting the hose.
    2. With firm grip on hose, give a sharp downward pull to release the fitting from the hose.

      Note

      No hose clamps or ferrules are needed

      Safety Notes

      • Dixon push-on fittings are intended for use with Lok-On (push-on style) hose only.
      • Caution: Push-on fittings will properly grip push-on hose only when pushed all the way in, with the cut end of the hose completely concealed by the plastic cap.

      Specifications

      Part Number Material Component Material Male Thread Male Thread Size Hose ID Hex Length
      2720402C Brass Yellow Plastic Cap NPTF 1/8"-27 1/4" 7/16" 1.42"
      2720404C Brass Yellow Plastic Cap NPTF 1/4"-18 1/4" 9/16" 1.61"
      2720604C Brass Yellow Plastic Cap NPTF 1/4"-18 3/8" 9/16" 1.76"
      2720606C Brass Yellow Plastic Cap NPTF 3/8"-18 3/8" 11/16" 1.76"
      2720608C Brass Yellow Plastic Cap NPTF 1/2"-14 3/8" 7/8" 1.97"
      2720612C Brass Yellow Plastic Cap NPTF 3/4"-14 3/8" 1-1/16" 1.97"
      2720804C Brass Yellow Plastic Cap NPTF 1/4"-18 1/2" 11/16" 1.86"
      2720806C Brass Yellow Plastic Cap NPTF 3/8"-18 1/2" 11/16" 1.86"
      2720808C Brass Yellow Plastic Cap NPTF 1/2"-14 1/2" 7/8" 2.07"